Neptune Chemical Pump Co., Inc. announced that its PZ Series Pumps have numerous designed in features that make this versatile line of pumps ideal for chlorine sterilization applications found in small-scale water-supply systems, buildings and swimming pools, to name a few.

Neptune PZ Series Pumps are also widely used in the irrigation and agricultural markets, and have been designed to operate with alternative power sources, making them ideal for applications in remote areas where electrical power sources are not available. To overcome this challenge, PZ pumps have been designed to operate on alternative power sources including belt-drive, solar power, hydraulic motor, 12-volt motor and gasoline motor.

Neptune has also designed the PZ Series pumps with a variety of different controls. PZ pumps operate on a manual control that produces speed ranging from 15 to 300 strokes per minute. PZi4 pump models are equipped with an external input automatic control. PZi8 models function courtesy of a programmable control for unattended applications. PZiG pumps are also programmable and typically operate with a motor-driven pump.

A variety of liquid-end materials are available for all models, from standard PVC to PVDF, stainless steel and acrylic. In addition, all PZ Series Pumps are equipped with a foot-valve strainer; a back-pressure check valve with quill; suction, discharge and air-release tubing; power cord with three-prong plug; and a signal cable with multi-pin connectors.

About Neptune
Neptune Chemical Pump Co., a producer of chemical metering pumps and chemical feed systems, is an operating company within Dover Corporation’s Pump Solutions Group (PSG).

Picture: Neptune PZ Series